Custom Painting

• Custom paint made to order
• Gloss, satin, matte, metallic or custom finish
• Professional spray booth application
• Color matching available with paint code
• Suitable for tanks, fenders, fairings, seats and other body parts
• Final polishing recommended after installation

Custom Motorcycle Paint Service

Give your motorcycle a unique finish with our professional custom paint service.

This service is available for compatible motorcycle parts purchased from us, including fuel tanks, front and rear fenders, café racer seat cowls, fairings, windshields and other bodywork.

Each part is individually prepared and painted to order according to your chosen color and finish. We can produce glossy, satin, matte, metallic and other custom finishes. If you require a specific factory or custom color, please provide us with the corresponding paint code when placing your order.

Professional Preparation and Painting

Each part is prepared before painting and the paint is professionally applied in a dedicated spray booth. Depending on the selected finish, the process may include surface preparation, primer, base coat, color coat and clear coat.

As this is a made-to-order service, slight variations may naturally occur depending on the material, shape of the part, paint type and requested finish.

Final Polishing After Installation

Our painter does not perform the final polishing of the part. This is intentional, as we recommend carrying out the final finishing polish once the painted part has been received and installed on the motorcycle.

Between leaving the paint booth and being installed, the part must be handled, protected, packed and transported. Even with careful packaging, a freshly painted surface may therefore show very light superficial marks, packaging impressions or small differences in gloss after transport. These are not necessarily defects in the paint itself.

For glossy painted parts, we strongly recommend a light finishing polish after installation. Performing this final step once the part is fitted allows you to remove minor handling or packaging marks, even out the surface appearance and obtain a more uniform gloss across the entire part. It also brings out the depth, clarity and final shine of the clear coat.

This final polishing step is particularly recommended for high-gloss finishes where even very small surface variations can be visible under direct light.

Use a fine automotive finishing polish suitable for clear coats together with a clean, soft microfiber cloth or an appropriate polishing pad.

Do not use acetone, brake cleaner, thinner or other aggressive solvents on painted surfaces.

Choosing Your Color

Please specify the desired color and finish by email when ordering. For a specific OEM, automotive or custom color, please provide the exact paint code whenever possible.

Email: contact@remmotorcycle.com

Example of Our Custom Paintwork