



Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
39629
🔩 Dedicated 3/8‑24 thread: single and double banjo versions to connect your brake lines precisely
🧰 Ready to install: washers supplied (x2 for single, x3 for double) for immediate sealing
✨ Electroplated silver finish: neat appearance and surface protection
✅ Targeted Harley-Davidson compatibility: excluding Sportster 2005+ and V‑ROD 2007+ per the source note
📦 Two clear references: 000431 (single) and 000442 (double)
🔩 Dedicated 3/8‑24 thread: single and double banjo versions to connect your brake lines precisely
🧰 Ready to install: washers supplied (x2 for single, x3 for double) for immediate sealing
✨ Electroplated silver finish: neat appearance and surface protection
✅ Targeted Harley-Davidson compatibility: excluding Sportster 2005+ and V‑ROD 2007+ per the source note
📦 Two clear references: 000431 (single) and 000442 (double)
Choose a 3/8‑24 banjo bolt designed for clean, safe installations, whether you need a single or double configuration. This caliper hose fitting comes in two distinct versions to cover common needs for customization or brake maintenance. Its electroplated silver finish provides a clean look and protects the surface.
The single version (ref. 000431) is supplied with 1 bolt and 2 washers, ideal for a single hose. The double version (ref. 000442) includes 1 bolt and 3 washers, perfect when feeding two lines from the same point. Information from the visuals specifies these parts are for a 3/8‑24 thread and reminds you to check the size at the main caliper side before installation to ensure a perfect match.
Important: the source explicitly mentions non‑compatibility with Sportster after 2004 and V‑ROD after 2006. If your motorcycle is concerned, carefully check the required thread. Additionally, the source title mentions “11 mm” without specifying the context (for example, diameter associated with the banjo); this value is therefore repeated here as is, without extrapolation.
Harley-Davidson Sportster (up to 2004)
Harley-Davidson V‑ROD (up to 2006)
Harley-Davidson Models using a 3/8‑24 thread at the caliper/master cylinder side
🛠 Type: 3/8‑24 caliper hose connection bolt (single: ref. 000431) / 3/8‑24 double bolt (ref. 000442)
📏 Dimensions: 3/8‑24 thread; “11 mm” value mentioned in the source title (context not specified)
✨ Finish: electroplated silver
📦 Contents – single version (000431): bolt ×1; washers ×2
📦 Contents – double version (000442): bolt ×1; washers ×3
⚠️ Source notes: not compatible with Sportster after 2004; not compatible with V‑ROD after 2006; check the size at the main caliper side
✔ Choice of configuration: single or double banjo to suit your setup
✔ Precise 3/8‑24 fitting for a clean, efficient assembly
✔ Electroplated silver finish for a neat appearance
✔ Washers included to help seal immediately upon installation
✔ Distinct references (000431 / 000442) to avoid selection errors
In some configurations, the stock part may not meet your needs (single → double conversion, replacing a worn component, adapting to specific hoses). An incorrect thread choice or an unsuitable number of outlets can compromise sealing and braking reliability.
Thread not suited to the hoses or caliper
Need to feed two hoses from one point (double banjo)
Worn or insufficient sealing washers
Stock finish and appearance not in line with your project
This 3/8‑24 banjo bolt, offered in single and double versions, addresses these situations precisely: you choose the right configuration, you have the required washers, and you benefit from a clean finish. By following the recommendation to check the size at the caliper side and the non‑compatibility note for certain Sportster and V‑ROD models, you ensure a proper installation.
Conversion to a double hose outlet (double version 000442)
Replacement of a worn or unsuitable single banjo (single version 000431)
Custom setups requiring a 3/8‑24 fitting
Restoration or preventive maintenance with new washers for better sealing
Harley-Davidson projects respecting the compatibility note (excluding Sportster 2005+ and V‑ROD 2007+)
PAYMENT IN 4 TIMES |
TESTED AND APPROVED |
NO CUSTOMS & TAXES |
Choose a 3/8‑24 banjo bolt designed for clean, safe installations, whether you need a single or double configuration. This caliper hose fitting comes in two distinct versions to cover common needs for customization or brake maintenance. Its electroplated silver finish provides a clean look and protects the surface.
The single version (ref. 000431) is supplied with 1 bolt and 2 washers, ideal for a single hose. The double version (ref. 000442) includes 1 bolt and 3 washers, perfect when feeding two lines from the same point. Information from the visuals specifies these parts are for a 3/8‑24 thread and reminds you to check the size at the main caliper side before installation to ensure a perfect match.
Important: the source explicitly mentions non‑compatibility with Sportster after 2004 and V‑ROD after 2006. If your motorcycle is concerned, carefully check the required thread. Additionally, the source title mentions “11 mm” without specifying the context (for example, diameter associated with the banjo); this value is therefore repeated here as is, without extrapolation.
Harley-Davidson Sportster (up to 2004)
Harley-Davidson V‑ROD (up to 2006)
Harley-Davidson Models using a 3/8‑24 thread at the caliper/master cylinder side
🛠 Type: 3/8‑24 caliper hose connection bolt (single: ref. 000431) / 3/8‑24 double bolt (ref. 000442)
📏 Dimensions: 3/8‑24 thread; “11 mm” value mentioned in the source title (context not specified)
✨ Finish: electroplated silver
📦 Contents – single version (000431): bolt ×1; washers ×2
📦 Contents – double version (000442): bolt ×1; washers ×3
⚠️ Source notes: not compatible with Sportster after 2004; not compatible with V‑ROD after 2006; check the size at the main caliper side
✔ Choice of configuration: single or double banjo to suit your setup
✔ Precise 3/8‑24 fitting for a clean, efficient assembly
✔ Electroplated silver finish for a neat appearance
✔ Washers included to help seal immediately upon installation
✔ Distinct references (000431 / 000442) to avoid selection errors
In some configurations, the stock part may not meet your needs (single → double conversion, replacing a worn component, adapting to specific hoses). An incorrect thread choice or an unsuitable number of outlets can compromise sealing and braking reliability.
Thread not suited to the hoses or caliper
Need to feed two hoses from one point (double banjo)
Worn or insufficient sealing washers
Stock finish and appearance not in line with your project
This 3/8‑24 banjo bolt, offered in single and double versions, addresses these situations precisely: you choose the right configuration, you have the required washers, and you benefit from a clean finish. By following the recommendation to check the size at the caliper side and the non‑compatibility note for certain Sportster and V‑ROD models, you ensure a proper installation.
Conversion to a double hose outlet (double version 000442)
Replacement of a worn or unsuitable single banjo (single version 000431)
Custom setups requiring a 3/8‑24 fitting
Restoration or preventive maintenance with new washers for better sealing
Harley-Davidson projects respecting the compatibility note (excluding Sportster 2005+ and V‑ROD 2007+)





