SEARCH BY CATEGORIES
SEARCH BY INSPIRATIONS
  • SEARCH BY MOTORCYCLE BRAND
    PLUS DE MOTO
  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Installation & Safety Notice – Premium Leather Seat for Triumph Scrambler 1200 XE / XC

    Installation & Safety Notice — Handmade Leather Seat
    Triumph Scrambler 1200 XE / XC (2019 >)

     

    This handcrafted replacement seat upgrades comfort and aesthetics while retaining OEM mounting points and seat-height. Seating regulations and air-bag / sensor clearances differ worldwide—review the table below before road use.

     

    Region Key Rules / Checks Your Responsibilities
    USA FMVSS 122 (brake hose) & FMVSS 213 (no passenger restraint) Seat retains original latch & height — OEM rear lamp & plate remain visible.
    Do not drill new holes; ensure seat pan clears ABS modulator & wiring.
    Use supplied rubber bump-stops to prevent pan contact with frame.
    EU / UK Reg.(EU) 168/2013 + MOT inspection Foam density and height unchanged ⇒ vehicle category remains unchanged.
    If embroidered logo is added, ensure no loose thread loops > 5 mm.
    MOT may fail if seat is loose—check latch clicks positively.
    Australia / NZ ADR 4/06 seat anchorages Seat attaches to OEM fixtures—no engineering sign-off needed.
    Confirm seat does not foul side-reflector visibility when rider seated.

    Universal Fitting Instructions

    • Remove OEM seat; inspect latch pin for corrosion—grease lightly.
    • Align new seat front tongue into tank slot; press rear downward until you hear a click. Pull upward to verify secure latching.
    • If fit is tight, adjust the two underside rubber stops by ±1 mm to achieve even contact.
    • After first ride, re-check latch engagement and rubber stop compression.

    Maintenance & Care

    • Full-grain leather: treat every 3 months with pH-neutral leather balm.
    • Do not use high-pressure washers directly on stitching.
    • Store the bike with the supplied breathable cover when parked in sunlight for prolonged periods to prevent UV fading.

     

    ⚠️ Riding with an improperly latched seat can cause sudden movement, loss of control and serious injury. Always verify latch engagement before each ride.

     

    ⚠️ California Proposition 65: This product can expose you to chemicals including chromium (leather tannins). For more information visit P65Warnings.ca.gov.