Menu
0
0

Your Cart is Empty

SEARCH BY CATEGORIES

  • BODYWORK
  • BRAKING

  • CONTROLS
  • CYCLE PARTS
  • ENGINE
  • EXHAUSTS
  • LIGHTING
  • SUSPENSIONS
  • MOTORCYCLE KIT
  • ECO PRODUCTS
  • GOODIES
    • SEARCH BY INSPIRATIONS
  • CAFE RACER
  • SCRAMBLER
  • BOBBER
  • BRATS / VINTAGE
  • FLAT TRACK / TRACKER
    • SEARCH BY MOTORCYCLE BRAND
    • PLUS DE MOTO

    Add description, images, menus and links to your mega menu

    A column with no settings can be used as a spacer

    Link to your collections, sales and even external links

    Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Add description, images, menus and links to your mega menu

    A column with no settings can be used as a spacer

    Link to your collections, sales and even external links

    Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Installation & Safety Notice – Brushed-Aluminum Wind Deflector Moto Guzzi V7 & V9

    Installation & Safety Notice — Aluminum Wind Deflector
    Fits Moto Guzzi V7 I-IV & V9 Roamer / Bobber

     

    This hand-formed fly-screen bolts to the front-indicator stalk bosses and improves wind deflection while preserving the classic Guzzi profile. Projection, edge-radius and lamp-visibility rules differ worldwide — review the table below before riding on public roads.

     

    Region Key Rules Your Checklist
    USA FMVSS 108 (head-lamp & indicator visibility) Screen must not obscure head-lamp cut-off or amber indicators.
    With bars full-lock L/R leave ≥ 20 mm clearance to levers & cables.
    Top edge below rider’s eye-line or beaded ≥ 2.5 mm radius.
    EU / UK UNECE R26 projections & MOT visibility Beaded lip ≥ 2.5 mm radius — supplied edge trim meets spec.
    Re-aim head-lamp beam after fitment (0 – 0.5° down).
    Indicators must remain ≥ 240 mm apart and visible 80° L/R.
    Australia / NZ ADR 42/04 projections Screen projection ≤ 150 mm forward of handle-bar and ≤ 30 mm above gauges.
    Use supplied rubber edging on top lip; no sharp corners > 5 mm.
    Verify cables and brake hose clear screen through full fork travel.

    Universal Fitting Instructions

    • Remove indicator stalk nuts (13 mm). Slip supplied aluminum brackets over stalk threads, screen tab facing forward.
    • Re-install indicators with M8 stainless washer & nyloc; torque 12 N·m.
    • Bolt wind-deflector panel to brackets with four M5 button-heads; use neoprene washers & torque 4 N·m.
    • Turn bars full-lock and compress fork — screen must not touch head-lamp shell, cables or brake hose (≥ 3 mm clearance).
    • Re-torque fixings after 100 km / 60 mi, then every service.

    Finishing & Care

    • Raw brushed alloy: coat with clear lacquer or wax to reduce oxidation.
    • Anodized finish: wash with pH-neutral soap; avoid abrasive pads.
    • To remove scratches, re-brush lightly with Scotch-Brite in one direction.

     

    ⚠️ Improper fitment, interference with controls, or sharp edges can cause loss of control and serious injury. Verify clearance and bolt torque before every ride.

     

    ⚠️ California Proposition 65: This product can expose you to chemicals including hexavalent chromium (from anodising or polishing). For more information visit P65Warnings.ca.gov.