Rear U frame scrambler Long and Rebuilt Dia. 0.86 in or 0.98 in (22 or 25 mm)

• Making Hand
• In Steel
  

U frame Introducing scrambler long and raised back

If you want to install a seatback record or edit shapeyour bike, this is perfect.

U frameis a part for attachment to the rear of the bike to closepart.

This enables more aesthetic the back of the bike.

U frame back scrambleris performed handsteel. Steel is untreated. It is available in diameter 0.86 in or 0.98 in (22or 25mm) and in several different widths.

Note the width is not measured but the spacing external widthas a distance wider.

The model is arranged in width: 175, 195, 205, 215, 225, 235 and 250 mm.

U frame back scrambler back long and raisedis ideal if you want to install a flat seat or change a quirky part by a more conventional line.

back U frame scrambler conveniently installed by being welded to the frame or to the original U frame.

You can narrow the parties at the end to match your frame.

We can U frame longerif you wish (a supplement may be requested according to the length to cover additional postage).

Here's an illustration of a short U frame:

The dimensions expressed correspond to the following dimensions:

Note:The width is expressed as the external width, distance between the ends of each side.

Description:

• Material: steel
• Color: Raw
• Diameter: 0.86 in / 0.98in (22 mm /25 mm)
• Length: +/- 55 cm

Note:

Some models may have a period of production 2 to 5 days.

The U frame is brut, it may be made in the surface rust. This does not prevent its proper use.