Motorcycle exhaust wrap

What is the motorcycle exhaust wrap

used for?

The motorcycle exhaust heat strip has several uses:

• It reduces the temperature of the exhaust to protect the rider's legs from burning.
• It can extend the life of the exhaust by reducing heat distortion.
• It can improve performance by reducing resistance to exhaust gas flow.
• It can also help protect surrounding motorcycle parts, such as saddlebags or saddles, from excessive heat.

Pros and cons of the motorcycle wrap:

What is the advantage of a motorcycle exhaust wrap ? 

Exhaust heat strips protect legs from burns, extend the life of the exhaust, improve performance, protect surrounding motorcycle parts, and can add aesthetic appeal. it allows to sell ugly exhaust pipes in some nice.

What is the desadvantage of a motorcycle exhaust wrap ?

Exhaust wrap can cause negative effects such as: heat retention, reduced airflow, fire hazard, environmental impact, and maintenance issues. It can also be illegal in some areas, and removing the catalytic converter is illegal in many areas. Can impact the engine temperature.

What materials does the motorcycle exhaust wrap consist of?

Motorcycle exhaust heat strips are usually made from heat resistant materials such as:

Fiberglass: this is an insulating, heat-resistant material that has long been used in motorcycle exhausts. It is heat resistant, but can be sensitive to impact and abrasion.

Carbon fiber: This is a heat resistant and lightweight material that is increasingly used in motorcycle exhausts. It is heat and abrasion resistant, but also expensive.

Ceramic: is an insulating and heat resistant material that is used in some exhaust heat strips. It is heat and abrasion resistant, but is also expensive.

There are other materials that can be used to make motorcycle exhaust heat strips, such as silicone, Kevlar or neoprene, but these materials are not as commonly used as fiberglass, carbon fiber and ceramic.

How many meters of motorcycle exhaust wrap ?

The length of the motorcycle exhaust heat strip will depend on the make and model of the motorcycle. It is important to check the length of the heat strip needed for your model of motorcycle before you purchase it.

In general, the length of the motorcycle exhaust heat tape will vary, depending on the size of the exhaust, the diameter and the type of overlap you want (tight or spaced). It is possible to cut the heat tape to fit the size of your motorcycle exhaust.

We advise you to make a first assembly called "blank" in order to define the length to cut. It is important to check the manufacturer's instructions on how to cut and install the thermal strip correctly to avoid damaging it or compromising its effectiveness.

Are there different colors?

Yes, there are several colors of motorcycle exhaust heat strips available on the market. The most common colors available are black, white, red and blue, but there are also other colors like green, orange, yellow, etc. Remmotorcycle offers you the most popular colors for the preparation of your custom like titanium wraps.

How to install the wrap on a motorcycle exhaust system?

1. Installing exhaust heat tape for your motorcycle will vary depending on the make and model of the motorcycle, but here are the general steps for installing heat tape:
2. Have the necessary tools ready, such as a cutter, a bucket of water, metal cleaner and hose clamps AND most importantly, gloves! It is highly recommended to use gloves when handling the heat tape.
3. Remove the exhaust covers to access the area you want to cover. Be careful, if you want to completely remove your exhaust, you will probably have to replace the gaskets to ensure the proper functioning of your engine.
4. Thoroughly clean the exhaust with a metal cleaner to remove grease, dirt and rust.
5. Measure and cut the heat strip to fit the exhaust, use clean cutter to avoid curling, soak it in water for a few hours to make it more flexible, apply it to multiple tubes in the same way for best results.
6. Apply the clamps to the exhaust to secure the heat tape in place. Make sure the heat tape is centered on the exhaust and that there are no air bubbles.
7. Reinstall it.

How to remove the wrap?

To remove exhaust wrap from a motorcycle, use wire cutters, pliers, a heat gun or blow dryer to cut, heat, and peel off the wrap. Clean and inspect the exhaust for any damage afterwards.

Install a motorcycle wrap exhaust on stainless steel

Using exhaust wrap on stainless steel exhaust pipes can help to keep the heat inside the exhaust system, which can increase the exhaust velocity and improve the performance of the engine. It can also help to reduce the temperature of the exhaust gases, which can help to prolong the life of the exhaust system.

Install a motorcycle wrap on titanium exhausts

To install exhaust wrap on a titanium exhaust systems, use a wrap rated for high temperatures and compatible with titanium. Be careful when wrapping to avoid over-stressing the pipes. Make sure there is enough space between the exhaust and other motorcycle parts to prevent damage.

Use silicone coating for motorcycle exhaust wrap

Silicone spray can be applied on exhaust wrap to improve its heat resistance, durability, easy to apply and protect it from elements. But it will not eliminate all the drawbacks of exhaust wrap and it's important to follow the instructions and seek professional help.

You will find below all our thermal strips for motorcycle exhaust: